Quick Start Guide
Start Your Treatment
Step 1
Screw the connector
Step 2
Tighten with the wrench
Step 3
Insert hose
Step 4
Open Tank
Step 5
Select your Nozzle and place it on the XR ISO
Step 6
Press and Hold the Blue On Button
Step 7
Press the middle Treatment Icon on Main Menu
Step 8
Select your Nozzle from the Image Screen(click continue)
Step 9
Select your time setting 30, 45, 60, 90, continous (click continue)
Step 10
Press the trigger button to begin treatment away from your client and gradually bring the stream to the area designated for treatment
Finish Your Treatment
Step 1
Press the trigger to stop the treatment or allow the time to complete
Step 2
Close the Tank (clockwise to the right)
Step 3
Purge the gas from the device by pressing the trigger to allow all gas to expel out of the line
Step 4
Disconnect the hose from the gas connector, or remain connected and place the XR ISO on the Dolly
Understanding Your XR ISO
Controls and Operation
-
1. Before using the device, choose one of the 7 interchangeable nozzles or 3 direct skin contact heads depending on the type of care and area you want to treat. Be sure to follow the protocol based on the treatment at hand. Simply screw the one you choose onto the front of the diffuser.
-
2. The first pulse on switch ( blue button ) turns the device on and allows a LCD touch screen with three icons to display on the main screen (Settings for imperial or metric)*(Treatment Icon)*(Thermal imager Icon)
-
3. Main Menu Settings Gear Icon allows you to switch from imperial or metric whether you want Celsius or Fahrenheit. Make sure to save the setting you would like displayed and go back into the main menu.
-
4. Main Menu Treatment (Middle) Icon allows you to begin treatment by selecting the appropriate nozzle allocated for the treatment, continue to determine the time setting from (30,45,60-90 seconds). Thermal display will occur prior to treatment. When ready you can press the LCD screen or the trigger to allow the production of cold at -110 ° F simultaneously with the display on the screen lowering the skin temperature for continuous monitoring.
-
a. Colors of Green, Blue, Red, and Blinking Red indicate specific temperatures and distances from the training.
Green -Appropriate distance
Blue - Appropriate therapeutic temperature
Red - Inappropriate temperature(MOVE THE DEVICE TO A NEW AREA)
Blinking Red - Inappropriate distance(SLIGHTLY MOVE FURTHER AWAY) -
b. Colors of Green, Blue, Red, and Blinking Red indicate specific temperatures and distances from the training.
Red - Hot
Yellow - Appropriate therapeutic temperature
Blue - Therapeutic temperature
Black - Too cold -
5. Main Menu Thermal Image Icon allows you to scan the body areas appropriately prior to treatment. With the OTC (over the cloud update) changes can be made on a picture option. Currently in production and will be updated soon.
-
6. Automatic disconnection occurs after 30 seconds, a new 30 second sequence can be started by simply pressing the ( trigger or the LCD screen ). Pressing back will allow you to go back into the treatment time setting and adjust treatment necessary.
